Description
Prof Mig 200- 230 v single phase
Machine comes with an earth lead,3m torch and regulator and a free welding mask
• Smoothing capacitors fitted in all models for best weld performance.
• All models weld down to 0.5mm metal (20amp min setting).
• Synergic control now standard for easy setting.
• Reverse polarity for gas or flux cored wires now standard.
• Tough steel case with galvanised chassis.
• Force fan cooled with higher airflow lower noise design.
• 8 or 12 volt steps for fine adjustment of power.
• Welds mild steel, stainless steel, Hardox, aluminium & alloys etc.
• Built in electronic burn back to finish every weld perfectly.
• 100% copper wound transformer with 5 year warranty.
• Very high efficiency = more weld power & lower running cost.
• Industry standard Euro torch connection.
• Wire size 0.6, 0.8 or 1.0 mm on 15kg or 5 kg spools.
• European wire drive system – feeds better than some 4 roll sets.
• Takes full size or smaller size gas cylinders.
• Higher duty cycle than most imported machines
Machine Specification
| Model | 200 |
| Amperage range | 20-200A maximum |
| Voltage steps | 8 |
| OCV (no load volts) | 17-36V |
| Input power | 230V 16/20A (13A OK to 75% output) |
| Duty cycle @ rated output | 125A@20V@35% |
| Output weld smoothing devices. | Smoothing capacitors + reactive choke |
| Min generator* | 3.5KVA |
| Weld wire range | 0.6-0.8mm |
| Weight | 51kg |
| Ideal applications | Automotive, light sheet fabrication, light box & tube work, maintenance welding. |
Please contact us on 01362687116 for information on the different machines and a shipping cost.
